行业
资讯

业内动态 精英访谈 会议活动 原料行情 市场走势 行业分析 数据报告

企业新闻 协会资讯 项目合作 产品资讯 技术文献 行业标准 政策法规

展会
资讯

展会动态

展会报告

专题
资讯

铸 件 铸造设备 铸造材料 特种铸造

铸造工具 仪器仪表 铸造辅料 工 业 炉

职场
资讯

职场攻略

培训充电

  • 重磅!2018年珠海压铸年会报告概览!

  • 发布时间:2018/11/21 15:13:19 来源:中国铸造网文字【 收藏浏览人数:1466
  • 内容摘要:2018年(珠海)中国压铸、挤压铸造、半固态加工年会粤港澳大湾区高端轻合金材料结构件产业创新与发展峰会暨中德铸造技术交流高峰论坛

     

    2018年(珠海)中国压铸、挤压铸造、半固态加工年会粤港澳大湾区高端轻合金材料结构件产业创新与发展峰会暨中德铸造技术交流高峰论坛

     

    大会报告(国宴厅)

    大会第一阶段主持人:(9:0011:55)

    袁晓光 教授(沈阳工业大学)

    Professor Xiaoguang Yuan (Shenyang University of Technology)

    赵海东 教授(华南理工大学)

    Professor Haidong Zhao (South China University of Technology)

     

    1.国家新材料产业发展趋势  (9:00 9:25)

    Development trend of new material industry in China

    报告人:郅 晓 教授级高级工程师( 国家新材料产业发展专家咨询委员会专家)

    Professorship Senior Engineer (National Expert Consultation Committee on new material industry development)

    2.糊状区动力学——温度梯度下的糊状区中的一百个过程(9:25 9:50)

    Mushy Zone Dynamics - The 100 Processes In A Mushy Zone Exposed to A Temperature Gradient

    报告人: Markus Rettenmayr 教授

    Professor Markus Rettenmayr (德国Friedrich-Schiller-University Jena材料科学与基础研究所)

    3.压铸过共晶铝硅合金组织形貌研究及应用(9:5010:15)

    The Microstructure Morphology Research and Application of Hypereutectic Al-Si Alloy in High Pressure Die Casting

    报告人:熊守美 教授 (清华大学材料学院) 

    Professor Shoumei Xiong  (Materials School, Tsinghua University)

    4. 变质处理铝合金中非均匀形核及晶粒生长行为的原位X射线照相术及数值模拟研究(10:1510:40)

    Revealing the Heterogeneous Nucleation and Grain Growth Behaviour of Inoculated Aluminium Alloy baay In-Situ X-Radiographic Study and Numerical Modelling

    报告人:李彦军  教授

     Professor Yanjun Li  【挪威科技大学(NTNU)材料科学与工程系)】

    5.轻金属先进铸造技术(10:4011:05)

    Advanced Casting Technologies for Light Metals

    报告人: 罗爱华 教授 (美国俄亥俄州立大学材料科学与工程系)

    Professor Aihua Luo(Department of Materials Science and Engineering, The Ohio State University)

    6.高性能镁合金及其在通讯和汽车行业的应用新进展(11:05 11:30)

    Recent Development on High Performance Magnesium Alloys and Their New Applications in Communications and Automotive Industry

    报告人:曾小勤 教授 (上海交通大学轻合金精密成型国家工程研究中心)

    Professor Xiaoqin Zeng ( National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiaotong University)

    7. 铸造技术及其在轻合金产品制造中的应用(11:30 11:55)

    Casting Techniques and their Application to the Fabrication of Light Alloy Products

    报告人:Stuart  Wiesner  博士

    Stuart Wiesner Phd.(Rheinfelden Alloys GmbH & Co.)

     

    大会第二阶段主持人:(14:00 16:05)
    李培杰 教授(清华大学)

    Professor Peijie Li (Tsinghua Univeristy)

    樊自田 教授(华中科技大学)

    Professor Zitian Fan (Huazhong University of Science and Technology)

    8. 多元多相铝合金热力学数据库的构建与应用(14:00 14:25)

    Establishment and application of a multi-component multi-phase thermodynamic database for Al alloys

    报告人:杜勇 教授(中南大学粉末冶金国家重点实验室)

    Professor Yong Du(State Key Laboratory of Powder Metallurgy, Central South University)

    9.MSI Eureka数据库——通往无机材料的门户(14:25 14:50

    MSI EUREKA – The Gateway to Inorganic Materials

    报告人:Liya Dreval 博士

    Liya Dreval Phd.(Materials Science International GmbH)

    10.材料组成:关键评估的必要性(14:50 15:15)

    Materials Constitution: The Need for Critical Evaluation

    报告人: Oleksandr Dovbenko 博士

    Oleksandr Dovbenko Phd.(Materials Science International GmbH)

    11.中国半固态加工(铸造)现状(15:15 15:40)

    Status of Semi-solid Casting in China

    报告人:杨湘杰 教授(南昌大学机电工程学院)

    Professor Xiangjie Yang ( School of Mechanical and Electrical Engineering, Nanchang University ) 

    12.压力对铝合金铸件组织性能的影响及APC s○R增压铸造的应用(15:40 16:05)

    Effect of Holding Pressure on Microstructure and Mechanical Properties of Aluminum Castings and the Application of Additive Pressure Castings Technique

    报告人:张 虎 教授 (北京航空航天大学材料科学与工程学院)

    Professor Hu Zhang(School of Materials Science and Engineering Beihang University)

     

    茶歇16:05 16:15

     

    大会第三阶段主持人:(16:15 18:20)
    齐乐华 教授(西北工业大学)

    Professor Lehua Qi(Northwestern Polytechnical University)

    韩志强 副教授(清华大学)

    Asso. Professor Zhiqiang Han (Tsinghua University)

    13. 凝固和热处理的热化学模拟(16:15 16:40)

    Thermochemical Simulation of  Solidification and Heat Treatment

    报告人:Moritz to Baben 博士 (德国GTT科技公司)

    Moritz to Baben Phd.(GTT-Technologies)

    14. 高强高刚度铸造铝锂合金研究与开发(16:40 17:05)

    Research and Development of High Strength and High Rigidity Cast Al-Li Alloys

    报告人:吴国华 教授(上海交通大学轻合金精密成型国家工程研究中心)

    Professor Guohua Wu  (National Engineering Research Center of Light Alloys Net Forming, Shanghai Jiaotong University)

    15. 基于多组元相场软件OpenPhase的镍基合金凝固模拟(17:05 17:30)

    Solidification simulation of NI-base alloys with

    报告人:Matthias Stratmann 博士

    Matthias Stratmann Phd.(OpenPhase Solutions GmbH)

    16.挤压铸造件的异常缺陷及质量控制要点(17:30 17:55)

    Abnormal Defects and Quality Control Points of Squeeze Casting Parts

    报告人:罗继相 教授(广州金邦液态模锻技术有限公司;武汉理工大学液态模锻工程技术研究中心)

    Professor Jixiang Luo  (Guangzhou KINBON Squeezing Die Casting Technology Co. ,Ltd . Research Center for liquid Die forging Engineering of Wuhan University of Technology)

    17.如何提高压铸模具寿命——德国葛利兹钢厂压铸模用钢、热处理配套及应用介绍(17:55 18:20)

    How to Improve Die Casting Mould Life -the Introduction to SWG Die Casting Mould Steels, Heat Treatment Facilities and The Applications

    报告人:Mr. Martin Sprunk (德国葛立兹钢厂模具钢大客户经理)

    Mr. Martin Sprunk (Key Account Manager for Tool Steels of Schmiedewerke Gröditz GmbH)

     

    主题报告

    一、有色合金压铸、挤压成形新技术主题会场(国兴厅 )

    (New Technology of Die Casting and Squeezing Casting for Nonferrous Alloy)(Location: Guoxing Hall) (8:20 12:10  )

    第一阶段主持人:(8:20 10:00)

    吴士平 教授 (哈尔滨工工业大学)

    Professor Shiping Wu (Harbin Institute of Technology)

    李润霞 教授(东莞理工学院)

    Professor Runxia Li (Dongguan College of Science and Technology)

    1.低压铸造镁合金转向节工艺与性能研究(8:20 8:40)

    Study on Process and Property of Low Pressure Die Casing Magnesium Alloy Steering Knuckle

    报告人:李德江 副教授(上海交通大学材料与科学工程学院)

    Asso.Professor Dejiang Li (The State Key Lab. of Metal Matrix Composites, Shanghai Jiao Tong University)

    2.压铸 Al 合金的空间界面传热行为及其对枝晶生长旳影响(8:40 9:00)

    Spatial Interface Heat Transfer of Gravity Die-cast Al Alloys and its Effect on Dendritic Growth

    报告人:赵海东 教授(华南理工大学广东省金属新材料制备与成形重点实验室)

    Professor Haidong Zhao PhD. (Guangdong Key Laboratory for New Metal Materials Preparation and Forming, South China University of Technology)

    3.挤压铸造铸件-模具界面热交换的实验研究及其模型化(9:00 9:20)

    报告人:韩志强 副教授(清华大学材料学院先进成形制造教育部重点实验室)

    Asso. Professor Zhiqiang Han (Key Laboratory for Advanced Materials Processing Technology (MOE)School of Materials Science and Engineering, Tsinghua University)

    4.挤压铸造工艺技术在汽车轻量化方面的应用(9:20 ~9:40)

    Application of Squeezing Casting in Light-Weight Development of Automobile

    报告人:孙 珏 高级工程师 (苏州三基装备有限公司)

    Jue Sun Senior Engineer (Suzhou Sanji Equipment Co. ,Ltd.)

    5.仿真模拟技术在压铸中的应用 (9:40 10:00)

    Application of Simulation in the Field of HPDC

    报告人:渠立欢 工程师 (帕盛博(苏州)软件科技有限公司)

    Jason Qu Engineer (PSB Engineering (Suzhou) Co. ,Ltd.)

     

    第二阶段主持人:(10:10 12:10)
    朱秀荣 研究员(中国兵器科学研究院宁波分院)

    Reseacher Xiurong Zhu (Ningbo Branch of China Ordnance Academy)

    廖敦明  教授(华中科技大学)

    Professor Dunming Liao (Huazhong University Of Science And Technology)

    6.压铸模具设计期望与实绩(10:10 10:30)

    Expectation and Achievement of Die Casting Die Mold

    报告人:唐和雍 高级工程师 (重庆建设.雅马哈摩托车股份有限公司)

    Heyong Tang Senior Engineer (Chongqing Comstruction .Yamaha Motorcycle Co. , Ltd.)

    7.复杂压铸件的缺陷定量预测与工艺优化(10:30 10:50)

    Defects Quantitative Prediction and Process Optimization  of Shape High Pressure Die Castings

    报告人:沈旭 博士(华中科技大学 材料成形与模具技术国家重点实验室)

    Xu Shen PhD. (State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science & Technology)

    8.手动和自动干冰清洗系统,应用于铸造、压铸工业(10:5011:10)

    Intelligent Manual and Automated Microparticle Dry Ice Cleaning Systems for The Foundry – Die Casting Industry

    报告人:孙刚  总监 (酷捷干冰设备(上海)有限公司)

    Gang Sun Manager(Coldjet Equipment (Shanghai)Co. ,Ltd.)

    9.A356.2铝合金增压铸造工艺研究(11:10 11:30)

    Research on Additive Pressure Casting Technology for A356.2 Aluminum Alloy

    报告人:宋炜 博士(北京航空航天大学青岛新材料技术研究院)

    Wei Song PhD. (Qingdao Institute of New Material Technology of Beihang University)

    10.汽车铝合金缸体低压铸造机器人自动化生产线(11:30 11:50)

    Machinery Arm Automotive Line for Low Pressure Casting Aluminum Alloy Cylinder of the Automobile

      报告人:康敬乐 高级工程师(国机铸锻机械有限公司)

    Jingle Kang Senior Engineer(China Machinery Group Casting-Forging Machinery Co. , Ltd.)

    11.挤压铸造铝合金件的开发与应用(11:50 12:10)

    Development and Application of Squeeze Casting Aluminum Alloy parts

    报告人:黄毅 工程师(广州金邦液态模锻技术有限公司)

    Yi Huang Engineer (Guangzhou KINBON Squeezing Die Casting Technology Co. ,Ltd.)


    二、半固态成形技术及其应用主题会场(国旺厅 )

    (Semi-Solid Forming Technology and Its Application)(Location: Guowang Hall)(8:20~12:10 )

    第一阶段主持人:(8:20~10:00)
    毛卫民   教授(北京科技大学材料科学与工程学院)

    Professor Weimin Mao(School of Materials Science and Engineering, University of Science and Technology)

    侯 华  教授(中北大学)

    Professor Hua Hou (North University of China)

    1.均冷环缝电磁搅拌制备半固态铝合金浆料研究(8:208:40)

    Study on Semi-solid Al Alloy Slurry Production by UC-AEMS  

    报告人:张志峰 教授(有研工程技术研究院有限公司)

    Professor Zhifeng Zhang ( General Research Institute of Nonferrous Metal)

    2.变形铝合金短流程制坯及其半固态触变成形研究(8:40~9:00)

    Research on Short-Process Fabrication and Thixoforming of Semisolid Billet of Wrought Aluminum Alloys

    报告人:姜巨福 教授 (哈尔滨工业大学材料科学与工程学院)

    Professor Jufu Jiang ( School of Materials Science and Engineering, Harbin Institute of Technology)

    3. 7075铝合金半固态触变-塑变复合成形的试验研究(9:00: 9:20)

    Experimental Study on Semi-solid Thixotrophic - plastic Composite Forming of 7075 Aluminum Alloy

    报告人:陈  刚  教授(哈尔滨工业大学(威海)材料科学与工程学院)

    Professor Gang Chen (School of Materials Science and Engineering, Harbin Institute of Technology (Weihai))

    4.大型薄壁件半固态流变压铸成形技术产业化(9:209:40)

    Industrialization of Semi-Solid Rheological Forming for Large Thin-Walled Parts

    报告人:景佰亨 高级工程师(珠海市润星泰电器有限公司)

    Baiheng Jing Engineer (Zhuhai Ruixingtai Elxtrical Equipment Co., Ltd)

    5. 颗粒增强铝基复合材料半固态搅拌制备(9:4010:00)

    Preparing Aluminum Matrix Composites By Semi-Solid Stirring Casting Method

    报告人:白月龙 教授(有研科技集团有限公司,国家有色金属复合材料工程技术研究中心)

    Professor Yuelong Bai (National Engineering Research Center for Nonferrous Metal Composites, General Research Institute of Nonferrous Alloy)

     

    第二阶段主持人:(10:1012:15)

    杜之明 教授(哈尔滨工业大学材料科学与工程学院)

    Professor Zhiming Du (School of Materials Science and Engineering, Harbin Institute of Technology)

    郭洪民 教授(南昌大学材料科学与工程学院)

    Professor Hongmin Guo (School of Materials Science and Engineering, Nanchang University)

    6.半固态A356-Nd合金中NdxAly化合物对凝固组织细化的影响(10:1010:30)

    Effects of Ndxaly Compound in Semi-Solid A356-Nd Alloy on Refinement of Solidification Structure

    报告人:刘 政 教授 (江西理工大学机电工程学院)

     Professor Zheng Liu (School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology;)


    7. 压射速度对高强铝合金半固态压铸件组织与性能的影响(10:3010:50)

    Effects of Injection Velocity on Microstructure and Properties of High Strength Aluminum Alloy Semi-Solid Die Casting Components

    报告人:赵君文 副教授(西南交通大学材料科学与工程学院)

    Asso. Professor Junwen Zhao(School of Materials Science and Engineering, Southwest Jiaotong University)


    8. Cr颗粒的添加对SiCp/7075铝复合材料的时效性能和力学性能的影响(10:5011:10)

    Effects of Cr Particle Addition on Aging Behavior and Mechanical Properties of Sicp/7075 Al Composites

    报告人:陆体文 博士研究生(华南理工大学广东省金属新材料制备与成形重点实验室)

     Tiwen Lu Phd. Candidate (Guangdong Key Laboratory for New Metal Materials Preparation and Forming, South China University of Technology)

    9. 半固态CuSn10P1合金单向等温压缩塑性变形行为及显微组织(11:1011:30)

    Unidirectional Isothermal Compression Plastic Deformation Behavior and Microstructure of Semi-solid CuSn10P1 Alloy

    报告人:王静波 硕士研究生(昆明理工大学材料科学与工程学院)

    Jingbo Wang  Master Candidate(Faculty of Material Science and Engineering, Kunming University of Science and Technology)

    10. 热处理时间对半固态挤压铜合金组织与力学性能的影响(11:3011:50)

    Effect of Heat Treatment Time on Microstructure and Mechanical Properties of Semi-solid Copper Alloy

    报告人:段志科 硕士研究生(昆明理工大学材料科学与工程学院)

    Zhike Duan Master Candidate(Faculty of Materials Science and Engineering, Kunming University of Science and Technology)

    11. 体积分数对三维互穿构型Al2O3/40Cr复合材料压缩力学性能的影响(11:5012:10)

    Effect of volume fraction of MMC framework on the compressive mechanical properties of a 3D interpenetrating Al2O3/40Cr architectured composites

    报告人:何光宇 硕士研究生(昆明理工大学材料科学与工程学院)

    Guangyu He Master Candidate(Faculty of Materials Science and Engineering, Kunming University of Science and Technology)

     

     三、轻有色合金及复合材料成分设计与制备主题会场(国萃厅)

    (Light Alloy, Composites Composition Design and Preparation) (Location: Guocui Hall) (8:30~12:10)

    第一阶段主持人:(8:2010:00)

    余欢 教授(南昌航空大学)

    Professor Huan YU (National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University)

    吴树森 教授(华中科技大学)

    Professor Shusen Wu (Huazhong University of Science and Technology)

    1.硼化钛基陶瓷/钛合金梯度熔合装甲材料工艺优化与抗弹性能研究(8:208:40)

    Processing Optimization of TiB2/Ti Alloy Gradient Fusion Armour Materials and Anti-Penetration Behavior

    报告人:赵忠民 教授(陆军工程大学石家庄校区车辆与电气工程系)

    Professor Zhongmin Zhao (Department of Vehicles and Electric Engineering, Army Engineering University(Shijiazhuang) 

    2.无需熔化获得高塑性精密非晶铸件—金属玻璃深过冷流变成型法(8:409:00)

    Amorphous Parts with High Plasticity with Smelting Free—Metallic Glass Undercooling Rheological Forming

    报告人:祖方遒 教授(合肥工业大学材料科学与工程学院)

    Professor Fangqiu Zu  (School of Materials Science and Engineering, Hefei University of Technology)

    3. 基于FEM与深度学习的合金设计与预报方法 (9:009:20)

    Method for Materials Design and Prediction by Means of FEM and Deep Learning

    报告人:周志敏 教授 (东北大学材料科学与工程学院)

    Professor Zhimin Zhou(School of Materials Science and Engineering, Northeastern University)

    4. 定量微结构表征和集成计算材料工程在铝合金开发中的应用(9:209:40)

    Application of Quantitative Microstructure Characterization and Integrated Computational Materials Engineering to The Exploration of Al Alloys

    报告人:李凯 副教授(中南大学粉末冶金国家重点实验室)

    Asso. Professor Kai Li (State Key Laboratory of Powder Metallurgy, Central South University)

    5.挤压工艺及La变质对Mg2Si/Al-Cu原位复合材料组织及性能的影响(9:4010:00)

    Influence of Squeeze Casting and La Addition on the Microstructure and Properties of the In-Situ Mg2Si/Al-Cu Composites

    报告人:李建宇 博士研究生(华中科技大学材料成形与模具技术国家重点实验室)

    Jianyu Li PhD. Candidate(State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology)

     

    第二阶段主持人:(10:1012:15)

    王恩刚 教授(东北大学)

    Professor Engang Wang (Northeastern University)

    靳玉春 教授(中北大学)

    Professor Yuchun Jin (North University of China)

    6.Mg、Sc对铸造铝合金导热和力学性能的影响(10:1010:30)

    Effects of Mg and Sc Elements on the Thermal Conductivity and Mechanical Properties of Casting Al Alloys

    报告人:邹纯 博士(中铝材料应用研究院有限公司苏州分公司)

    Chun Zou PhD.(Chinalco Materials Application Research Institute Co., Ltd. Suzhou Branch)

    7.基于ANN的喷射成形TiCP/ZA35复合材料热挤压工艺优化(10:3010:50)

    Optimization of Heat Extrusion Processing for Spray Forming TiCp/ZA35 Composites Based on ANN (10:4011:00)

    报告人:刘敬福 教授(辽宁工程技术大学材料科学与工程学院)

    Professor Jingfu Liu(College of  Material Science and Engineering ,Liaoning Technical University)

    8.高熵合金增强铸造铝合金的组织与性能(10:5011:10)

    Microstructure and Properties of High Entropy Alloy Reinforced Cast Aluminum Alloy

    报告人:朱德智 副教授(华南理工大学广东省金属新材料制备与成形重点实验室)

    Asso. Professor Dezhi Zhu (Guangdong Key Laboratory for New Metal Materials Preparation and Forming, South China University of Technology)

    9.ZE42镁合金板材拉伸变形行为和热加工图(11:1011:30)

    Tensile Deformation Behavior and Hot Processing Map of ZE42 Magnesium Alloy Sheet

    报告人:王中军 教授(辽宁科技大学材料与冶金学院)

    Professor Zhongjun Wang(School of Materials and Metallurgy, University of Science and Technology Liaoning)

    10.铝合金先进焊接技术发展现状与趋势(11:3011:50)

    Present Status and Prospect of Advanced Welding Technology for Aluminum Alloy

    报告人: 谭锦红 高级工程师(广东省焊接技术研究所)
    Jinhong Tan Senior Engineer (Welding Technology Research  Institute of Guangdong)

    11.超声处理对纳米SiC颗粒增强A356铝基复合材料中微观组织的影响(11:5012:10)

    Refinement of Nano-Sicp/A356 Composites with Ultrasonic Vibration

    报告人:袁 渡 博士研究生(华中科技大学材料成形与模具技术国家重点实验室)

    Du Yuan PhD. Candidate(State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology)

     

    提前报名优惠最后24h,详询特种铸造及有色合金杂志社!

    会议联系方式

    1、《特种铸造及有色合金》杂志社:

    电话:027-85486024; 85358206  

    传真:027-85358127

    电子信箱:tzzz626@163.com

    联系人 刘卫  13697338518;  张正贺 13627266943;栗万仲 13797077395;刘晨辉 18086469556

    2、德中(珠海)轻合金材料研究院秘书处:

    联 系 人:易新贤  18928058118; 王立新13926906299; 黄海波13018484148。 

    3、中南大学/中德铝合金微结构联合实验室秘书处:

    联系人:杜勇13974962527; 李凯18973163497。

  • 上一篇:Alicona 在刀具3D检测中的应用
  • 下一篇:工程机械行业上市公司前三季度业绩预告出炉!
  • 相关评论
一周热点
协会资讯
展会报告
政策法规
行业标准
技术文献